Conformal Coating Agent - List of Manufacturers, Suppliers, Companies and Products

Conformal Coating Agent Product List

1～8 item / All 8 items

Displayed results
Conformal coating agent

Conformal coating agent

This is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion.

Adachi New Industry proposes various silicone products for electrical and electronic components as an authorized dealer of Momentive. ◆◆What is a conformal coating? It is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects the boards and components from mechanical and environmental corrosion, such as moisture, humidity, and corrosive substances. The application methods include dip, spray, and flow coating, with a typical thickness of around 10 to 200 micrometers. ◆◆Features 1) The most notable feature is that it is a "solvent-free product." 2) It cures quickly at room temperature. 3) It is a reduced product of low molecular siloxane. 4) It has excellent cold and heat resistance. 5) It is a product that can be stored at room temperature. 6) It shows good adhesion to various materials. 7) It has no corrosiveness to metals. 8) The application state can be easily checked with a black light.

  • glue
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent [Proven track record with automotive PCBs; non-organic solvent]

Conformal coating agent [Proven track record with automotive PCBs; non-organic solvent]

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in the manufacturing environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational health and safety law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

  • others
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent "Protects from lithium battery electrolyte"

Conformal coating agent "Protects from lithium battery electrolyte"

The only moisture-proof coating agent for implementation boards that can protect against lithium battery electrolytes. SDGs environmentally friendly type (non-organic solvent + non-hazardous + low odor).

The coating agent for substrates (conformal coating) "Fluorosurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from the restrictions of fire laws and safety regulations. Furthermore, no PFAS regulated substances such as PFOS, PFOA, or PFHxS are used. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It offers four times the moisture resistance compared to urethane or acrylic moisture-proof coatings at the same film thickness! It demonstrates more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances like lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It also provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, exhibiting rust prevention effects. - It does not contain unreacted low molecular compounds like silicone or UV-curable types, ensuring high reliability. It will not cause contact failure of electrical contacts after application.

  • others
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conformal coating agent 'Ideal for narrow pitch leak prevention'

Conformal coating agent 'Ideal for narrow pitch leak prevention'

Moisture-proof coating agent for substrates. Strongly prevents leakage with high insulation properties. Room temperature drying type. SDGs compliant (non-organic solvent + non-hazardous + low odor).

The "Fluorosurf FG-3650 Series" conformal coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproofing properties. → It offers four times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It demonstrates more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board during electrolyte leakage, preventing fire accidents. - It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

  • others
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Conformal Coating Examples] Proven performance for aircraft and automotive substrates.

[Conformal Coating Examples] Proven performance for aircraft and automotive substrates.

It has four times the moisture resistance of urethane and acrylic, protecting printed circuit boards from moisture and electrolytic solutions. It is classified as non-hazardous under fire safety laws and does not fall under organic solvents, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Examples of Acid Gas Countermeasures] Strongly protects printed circuit boards from acidic gases and moisture.

[Examples of Acid Gas Countermeasures] Strongly protects printed circuit boards from acidic gases and moisture.

It has four times the moisture resistance of urethane and acrylic, and protects the substrate from acidic gases and moisture with a thin film. It is classified as non-hazardous under fire safety laws and is not subject to organic solvent regulations, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed to protect printed circuit boards from acidic substances (such as hydrogen sulfide gas and lithium battery electrolyte). It provides strong protection for metals against acidic gases and liquids with a thin film, ensuring long-term protection for printed circuit boards. 【Reasons to Choose FG-3650】 ■ High protective performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are not required ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), so environmental measurements and organic solvent health checks for workers are not necessary, making on-site management easier ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Example of substrate coating】Strongly protects the substrate from acids and moisture.

【Example of substrate coating】Strongly protects the substrate from acids and moisture.

It has four times the moisture resistance of urethane and acrylic, and protects the substrate from moisture and electrolytic solutions with a thin film. It is classified as non-hazardous under the Fire Service Act and is not subject to organic solvent regulations, ensuring high safety.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of printed circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others
  • Conformal Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Conformal Coating Agent

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.